FABRIC-SHIELD™ STORM PANELS

FABRIC-SHIELD™ PULL-DOWN SHUTTERS

Do-It-Yourself (DIY) STORM PANELS

DECORATIVE COVERS

FABRIC-SHIELD™ HARDWARE

PICTURE GALLERY

SUPPORT MATERIALS:

• Engineering Documentation
  
• Installation Documentation
• Fabric-Shield™ Demo Video
• DIY Storm Panel Tutorial
• Testing Documentation

CONTRACTOR / INSTALLER DIRECTORY

WAYNE-DALTON WEBSITE

Fabric-Shield™ Storm Panels by Wayne-Dalton
"Fabric-Shield™ Protects Against The Storm."

Wayne-Dalton FABRIC-SHIELD™ Storm Panels are a highly-effective alternative to steel or aluminum hurricane panels. These PVC coated woven fabric panels are tested to block wind, rain and storm-driven projectiles. Yet FABRIC-SHIELD™ panels are lightweight, easy-to-handle and translucent, allowing light to enter.

Features & Benefits:

• Florida Product Approved #FL2187
• Attractive - No exterior housing or tracks. Natural Color.
• Convenient - Panels may be rolled, laid flat or hung for compact, easy storage.
• Lightweight - Weigh a fraction of steel or aluminum panels and still meet stringent test protocols.
• No special tools required - Panels attach to structure with grommets.
• Quick to deploy and remove.
• Translucent, allowing diffused light to enter.

Size Information

For every Fabric-Shield™ Panel, there is a Span and Non-Span measurement. The SPAN measurement is the distance between the center points of two parallel grommets, and has a maximum measurement of 108”. Measure from the exact point where you will install a fastener, to the exact point where you will install the opposite fastener to get a Span measurement.

The Non-Span dimension is the measurement between the edges of the non-grommet sides of the panel and has a maximum of 144.” Try to overlap the Non-Span measurement 2” top and 2” bottom for the best hurricane damage prevention.
All measurements must be rounded up to the nearest inch.

Standard Sizes: Standard sizes are available in any span dimension of 33”, 38”, 40”, 42”, 45”, 57”, 60”, 66”, 69”, 76”, 79”, 82”, 84”, 87”, and 108” sizes. For the non-span dimension, panels are available in 2” increments starting at 12” and continuing up to 144” (max.)

Custom Sizes: Custom sizes are available in 1” increments for both the span and non-span dimensions. Round up to the nearest 1” increment when measuring for storm panels. Limitations: Span maximum is 108”, minimum is 9”; Non-span maximum is 144”, minimum is 12”.

Compare Hurricane Panels

Testing Information

Wayne-Dalton FABRIC-SHIELD™ Storm Panels pass windload, impact and cycling testing in accordance with:

• Florida Building Code TAS 201, TAS 202 & TAS 203
• ASTM E330-02, ASTM E1886-02 & ASTM E1996-02
• Florida state wide product approved
• Texas department of insurance compliant
• Design Pressure = +62/-66 psf
• Test Pressure = +93/-99 psf