Structall Building Supply - The Professional Contractor's Resource for Aluminum Building Supplies & Laminated Panels

FABRIC-SHIELD™ STORM PANELS

FABRIC-SHIELD™ PULL-DOWN SHUTTERS

Do-It-Yourself (DIY) STORM PANELS

DECORATIVE COVERS

FABRIC-SHIELD™ HARDWARE

PICTURE GALLERY

SUPPORT MATERIALS:

Engineering Documentation

Installation Documentation

Fabric-Shield™ Demo Video

DIY Storm Panel Tutorial

Testing Documentation

CONTRACTOR / INSTALLER DIRECTORY

WAYNE-DALTON WEBSITE

Fabric-Shield™ Pull-Down Storm Shutters

Wayne-Dalton FABRIC-SHIELD™ Pull-Down Storm Shutters are the newest product in the Fabric-Shield™ family. This revolutionary new product is designed to cover windows, doors and other home openings to protect against damage caused by wind, rain, and storm-driven projectiles. The patented design of this shutter utilizes an architecturally pleasing 4” square canister and quickly operates by simply pulling the fabric barrier down until it locks in the closed position.

The units are shipped almost fully assembled, allowing for final assembly to be done in just a few minutes, thereby saving significant labor costs.

Storm shutters are perfect for second floor or high-rise applications, since it can be opened and closed from inside the room. Storm Shutters are also perfect for the elderly or disabled, since it requires no lifting, tools, or assembly to deploy before a storm. The fabric panels are UV, mold, and mildew resistant, and can be used as a sunshade all year round.

Features & Benefits:

Florida Product Approved #FL2753.

Texas Dept. of Insurance approved.

Cost effective.

Attractive - Architecturally pleasing: does not detract from architectural design of the home.

Assembles quickly: Installers can fabricate and install in less than 15 minutes.

Can be quickly deployed for hurricane protection simply by pulling it down until it locks into place.

Translucent, allowing diffused light to enter. Can be used as a sun shade.

Size Information

Storm Shutter have a Span dimension (left fastener center to right fastener center) and a Non-Span dimension (overall unit height). Storm Shutters must be installed with the shutter canister at the top of the window, allowing the shade to pull down from the top to the bottom of the window.

Pull-Down Shutter sizes are available in 1/4” increments for both the span and non-span dimensions. Round to the nearest 1/4” increment when measuring for storm shutters. Limitations: Span minimum is 15”, maximum is 84” and Non-Span minimum is 16”, maximum is 82”.

Testing Information

Wayne-Dalton FABRIC-SHIELD Storm Panels pass windload, impact and cycling testing in accordance with:

Florida Building Code TAS 201, 202, 203

ASTM E330, ASTM E1886 & ASTM E1996

Test report number HETI-03-1361 & HETI 03-1874

Design Pressure = ±57 psf

Test Pressure = ±85.5 psf

2006© Structall Building Supply

Wayne-Dalton FABRIC-SHIELD™ Pull-Down Storm Shutters are the newest product in the Fabric-Shield™ family. This revolutionary new product is designed to cover windows, doors and other home openings to protect against damage caused by wind, rain, and storm-driven projectiles. The patented design of this shutter utilizes an architecturally pleasing 4” square canister and quickly operates by simply pulling the fabric barrier down until it locks in the closed position.

The units are shipped almost fully assembled, allowing for final assembly to be done in just a few minutes, thereby saving significant labor costs.

Storm shutters are perfect for second floor or high-rise applications, since it can be opened and closed from inside the room. Storm Shutters are also perfect for the elderly or disabled, since it requires no lifting, tools, or assembly to deploy before a storm. The fabric panels are UV, mold, and mildew resistant, and can be used as a sunshade all year round.

Florida Product Approved #FL2753.
Texas Dept. of Insurance approved.
Cost effective.
Attractive - Architecturally pleasing: does not detract from architectural design of the home.
Assembles quickly: Installers can fabricate and install in less than 15 minutes.
Can be quickly deployed for hurricane protection simply by pulling it down until it locks into place.
Translucent, allowing diffused light to enter. Can be used as a sun shade.

Storm Shutter have a Span dimension (left fastener center to right fastener center) and a Non-Span dimension (overall unit height). Storm Shutters must be installed with the shutter canister at the top of the window, allowing the shade to pull down from the top to the bottom of the window.

Pull-Down Shutter sizes are available in 1/4” increments for both the span and non-span dimensions. Round to the nearest 1/4” increment when measuring for storm shutters. Limitations: Span minimum is 15”, maximum is 84” and Non-Span minimum is 16”, maximum is 82”.

Wayne-Dalton FABRIC-SHIELD Storm Panels pass windload, impact and cycling testing in accordance with: