Carports, Walkcovers & Canopies

The Snap-N-Lock™ Insulated Panel, manufactured by Structall Building Systems, Inc., offers the architect and developer planning a carport, canopy or walkcover a wide range of design flexibility and product benefits. Whether your unit is free-standing, wall mounted, has a flat or gable roof or must complement existing architectural styles, the system adapts easily.

It features a routed expanded polystyrene foam core that provides continuous insulation and eliminates any concern over condensation problems. The skins are rolled to form a unique, patented locking system that allows sealant to be applied on the inside of the panel. This protects the sealant from ultraviolet destruction and forms a waterproof seal. The panels go together quickly and easily and are built to last.

Depending on the job requirements, the panel can be built 3" to 8" thick and comes in 23-1/8" and 4' widths. Various gauges of aluminum and steel are available. Internal beams can be built right into the panel for a multitude of uses including lighting and fan support. If you wish to add a splash of sun to your walkcover or canopy, openings can be precut and framed at the factory for skylights. Panels can be manufactured to the exact length needed, saving valuable time at the job site and are pre-engineered to snap directly together.

The product is backed by a 10 year limited manufacturer's warranty and complies with national building codes.

Whether you represent a school, hospital, military base or church, Snap-N-Lock™ Insulated Panels are the perfect choice for a beautiful yet economical walkcover. The panels are also proven and tested in many other applications including vending booth covers, in-plant offices, restaurants, industrial storage units, condominium carport facilities, storefront canopies, utility covers, carwash structures, and loading zone canopies.

Advantages of a Structall Structure

SPECIFICATIONS

General
STRUCTALL BUILDING SYSTEMS, INC. of Oldsmar, Florida, manufactures the patented Snap-N-Lock™ Insulated Roof and Wall Panel and carries a wide selection of extrusions, fasteners and building components. The panel is ideal for carports, walkway covers, and canopies as well as various other commercial applications and residential home uses.

Design Loads
All components shall be designed to meet or exceed the specified vertical and horizontal load requirements in accordance with STRUCTALL engineering data and BOCA and National Building codes. Snap-N-Lock™ Insulated Roof Panels are capable of supporting up to 57 lbs. per square foot combined with various wind loadings up to 120 m.p.h. (Optional) Calculations are available to meet local building codes and for special projects.

Roof Panels
STRUCTALL'S Snap-N-Lock™ Insulated Roof Panels are available in various gauges of aluminum and steel and are coated with a selection of baked enamels of 1.0 mil. Finishes include stucco and cedar (optional) embossed. Panels are available in 23-1/8" and 4' widths, 3" to 8" thick and are capable of supporting 57 lbs. live load per sq. ft. at up to 20' spans between framing members under normal application.

Columns
STRUCTALL columns shall be a minimum of 3" x 3" x 1/8" aluminum posts. Adequate reinforcing to support bolted connections at the top shall be provided. Standard clearance minimum of 7' for all structures. Other columns available.

Beams
6" - 9" STRUCTALL self-mating beams are available in white or bronze. Ivory available for limited sizes. (See engineering chart to determine appropriate size.)

Fasteners
The STRUCTALL Snap-N-Lock™ Insulated Roof Panels shall be secured on the top side thru panel and into cross beams with #10 screws and 1-1/2" neoprene metal washers. The fascia and trim will be secured with #8 x 9/16" self drilling tek screws. See installation instructions to determine quantity requirements.

Drainage
Optional gutters and fascia are available through STRUCTALL.

Installation
The general contractor or manufacturer's agent shall follow installation instructions supplied by STRUCTALL.